Router Repeater Setup using WDS on Tomato/DD-WRT

Wireless Distribution System (WDS) Repeater Network setup Follow the instructions here The "Basic Wireless" Setup screen should look like this afterwards: Main Router - Buffalo WHR-G125 (usually with Internet Access) WAN port connected to Internet WAN (configure normally) LAN IP Address = 10.0.0.1 DHCP Server = enabled Wireless Wireless Mode = Access Point + WDS SSID = WifiLapper-EnduroRacer (change to your own unique suffex) Channel = 1 Security = WPA Personal Encryption = AES Shared Key = putyoursharedkeyhere WDS = Link With MAC Address = (*wireless* MAC address of the Repeater Router below) Repeater Router - Linksys WRT54G (No internet access) WAN port not used WAN Type = Disabled LAN IP Address = 10.0.0.2 Default Gateway = 10.0.0.1 (Main Router IP address) Static DNS = 10.0.0.1 (Main Router IP address) DHCP Server = Disabled (Main Router handles DHCP) Wireless Wireless Mode = WDS SSID = WifiLapper-EnduroRacer Channel = 1 Security = WPA Personal Encryption = AES Shared Key = putyoursharedkeyhere WDS = Link With MAC Address = (*wireless* MAC address of the Main Router) (might not even need to be set)