OpenSCAD User Manual/Libraries

Library locations OpenSCAD uses three library locations, the installation library, built-in library, and user-defined libraries. The Installation library location is the libraries directory under the directory where OpenSCAD is installed. The Built-In library location is O/S dependent. Since version 2014.03, it can be opened in the system specific file manager using the "File->Show Library Folder..." menu entry. Windows: My Documents\OpenSCAD\libraries Linux: $HOME/.local/share/OpenSCAD/libraries Mac OS X: $HOME/Documents/OpenSCAD/libraries The User-Defined library path can be created using the OPENSCADPATH Environment Variable to point to the library(s). OPENSCADPATH can contain multiple directories in case you have library collections in more than one place, separate directories with a semi-colon for Windows, and a colon for Linux/Mac OS. For example: Windows: C:\Users\A_user\Documents\OpenSCAD\MyLib;C:\Thingiverse Stuff\OpenSCAD Things;D:\test_stuff (Note: For Windows, in versions prior to 2014.02.22 there is a bug preventing multiple directories in OPENSCADPATH as described above, it uses a colon (:) to separate directories. A workaround, if your libraries are on C: is to leave off the drive letter & colon, e.g. \Thingiverse Stuff\OpenSCAD Things:\stuff. For more about setting Windows environment variables, see User Environment Variables. Linux/Mac OS: /usr/lib:/home/mylib:. OpenSCAD must be restarted to recognize any change to the OPENSCADPATH Environment Variable. When you specify a non-fully qualified path and filename in the use <...> or include <...> statement OpenSCAD looks for the file in the following directories in the following order: the directory of the calling .scad file the User-Defined library paths (OPENSCADPATH) the Built-In library (i.e. the O/S dependent locations above) the Installation library In the case of a library file itself having use <...> or include <...> the directory of the library .scad file is the 'calling' file, i.e. when looking for libraries within a library, it does not check the directory of the top level .scad file. For example, with the following locations and files defined: (with OPENSCADPATH=/usr/lib:/home/lib_os:.) 1. <installation library>/lib1.scad 2. <built-in library>/lib2.scad 3. <built-in library>/sublib/lib2.scad 4. <built-in library>/sublib/lib3.scad 5. /usr/lib/lib2.scad 6. /home/lib_os/sublib/lib3.scad The following include <...> statements match to the nominated library files include <lib1.scad> // #1. include <lib2.scad> // #5. include <sublib/lib2.scad> // #3. include <sublib/lib3.scad> // #6. Since 2014.03, the currently active list of locations can be verified in the "Help->Library Info" dialog. The details info shows both the content of the OPENSCADPATH variable and the list of all library locations. The locations are searched in the order they appear in this list. For example; OPENSCADPATH: /data/lib1:/data/lib2 OpenSCAD library path: /data/lib1 /data/lib2 /home/user/.local/share/OpenSCAD/libraries /opt/OpenSCAD/libraries Setting OPENSCADPATH The page on PATHS covers how personal settings for other resources may be set up for OpenSCAD. Windows Windows 11, any version The environment variable editor is accessed from the Control Panel > System > About panel Right Click This PC icon on the desktop OR Start Menu > Settings > System > (scroll down) About OR Start Menu > Settings and search for "env" - then skip to Click the New.. below Next - scroll down to between Device Specifications and Windows Specifications Select Advanced System Options of the four tabs A pop-up will let you confirm that you allow access to admin level System Properties. Select the Advanced Tab, then the Environment Variables button Best to set OPENSCADPATH as a personal env var, rather than a System Variable. Click the New... button In the popup set OPENSCADPATH as the new name set %USERPROFILE%\Documents\OpenSCAD\libraries and the content The folder ~/AppData/Local/OpenSCAD/ is not normally used by OpenSCAD for libraries On Linux The environment variable may be set for all users by using a command (as follows) to append the definition to the end of the global profile definition file in a terminal session the use of sudo gives the required admin privilege to the command so be prepared with the admin password Info shell sudo sh -c 'echo "OPENSCADPATH=$HOME/openscad/libraries" >>/etc/profile' bash sudo bash -c 'echo "export OPENSCADPATH=$HOME/openscad/libraries" >>/etc/profile' zsh sudo zsh -c 'echo "export OPENSCADPATH=$HOME/openscad/libraries" >>/etc/profile' csh sudo csh -c 'echo "setenv OPENSCADPATH $HOME/openscad/libraries" >>/etc/csh.cshrc' the shell profile setup files .bashrc or .zshrc are only used when starting new interactive sessions. Variables that should be available for headless operations, like OPENSCADPATH, should be set as suggested above. Warning 16 Or, the variable may be set only for one's own account without sudo: shell sh -c 'echo "OPENSCADPATH=$HOME/openscad/libraries" >>~/profile' bash bash -c 'echo "export OPENSCADPATH=$HOME/openscad/libraries" >>~/.bash_profile' zsh zsh -c 'echo "export OPENSCADPATH=$HOME/openscad/libraries" >>~/.zprofile' csh csh -c 'echo "setenv OPENSCADPATH $HOME/openscad/libraries" >>~/.cshrc' If there is a chance that OPENSCADPATH has been set globally, and the personal folder should be appended to the global PATH, change the definition to something like: export OPENSCADPATH=$OPENSCADPATH:~/.config/openscad/libraries OR perhaps export OPENSCADPATH=$OPENSCADPATH:$XDG_CONFIG_HOME/openscad/libraries Mac OS X To set the OPENSCADPATH globally so that it is set for all users to a folder in each users' home folder give this command in a terminal window: launchctl setenv OPENSCADPATH "$HOME/my/own/path" For more control on environment variables, you'll need to edit the configuration files; see for example this page. On Mac, you need to modify the /etc/launchd.conf: sudo sh -c 'echo "setenv OPENSCADPATH /Users/myuser/my/own/path" >>/etc/launchd.conf' The variable will be available at next reboot. To avoid to reboot and use it immediately, issue the following commands: egrep "^setenv\ " /etc/launchd.conf | xargs -t -L 1 launchctl killall Dock killall Spotlight MCAD OpenSCAD bundles the MCAD library. There are many different forks floating around (e.g., , ) many of them unmaintained. MCAD bundles a lot of stuff, of varying quality, including: Many common shapes like rounded boxes, regular polygons and polyhedra in 2D and 3D Gear generator for involute gears and bevel gears. Stepper motor mount helpers, stepper and servo outlines Nuts, bolts and bearings Screws and augers Material definitions for common materials Mathematical constants, curves Teardrop holes and polyholes The git repo also contains python code to scrape OpenSCAD code, a testing framework and SolidPython, an external python library for solid cad. More details on using MCAD are in a later chapter, OpenSCAD User Manual/MCAD. Other libraries Belfry OpenScad Library has many shapes, masks, manipulators, and support for threading, gears, polylines and beziers. Bevel library for OpenScad BOLTS tries to build a standard part and vitamin library that can be used with OpenSCAD and other CAD tools. Celtic knot library is used for the generation of celtic knots. Colorspace converter for working with colors in HSV and RGB: Dimensioned Drawings provides tools to create proper 2D technical drawings of your 3D objects. DotSCAD comprehensive library of 2D and 3D operations and transforms including extrusion along arbitrary paths, shape bending, etc. Fillets, a comprehensive fillets library by Stephanie Shaltes. Local.scad provides a flexible method for positioning parts of a design. Is also used in BOLTS. Michigan Tech's Open Sustainability Technology Lab (MOST) libraries Obiscad contains various useful tools, notably a framework for attaching modules on other modules in a simple and modular way. OpenSCAD threads library: provides ISO conform metric and imperial threads and support internal and external threads and multiple starts. Pinball Library: provides many components for pinball design work, including models for 3d printing of the parts, 3d descriptions of mount holes for CNC drilling and 2d descriptions of parts footprint Regular shapes library by Giles Bathgates]: provides regular polygons and polyeders and is included in MCAD. Roller Chain Sprockets OpenSCAD Module lets you create sprockets for ANSI chains and motorcycle chains. Contains hard coded fudge factors, may require tweaking. SCADBoard is a library for designing 3D printed PCBs in OpenSCAD. Shapes library contains many shapes like rounded boxes, regular polygons. It is also included in MCAD. The 2D connection library helps with connections between 2D sheets, which is useful for laser cut designs. Ruler helps in determining the size of things in OpenSCAD. Knurled surface library by aubenc Text module based on technical lettering style. Round corners for Openscad, also at https://www.thingiverse.com/thing:8812 Unit test framework Utility function collection. Workflow library: full workflows, by Ulrich Bär There is also a list with more libraries here: https://github.com/openscad/openscad/wiki/Libraries Other OpenSCAD tutorials and documentation "OpenSCAD User Manual" http://www.openscad.org/documentation.html "Know only 10 things to be dangerous in OpenSCAD" https://cubehero.com/2013/11/19/know-only-10-things-to-be-dangerous-in-openscad/ "OpenScad beginners tutorial" http://edutechwiki.unige.ch/en/OpenScad_beginners_tutorial "How to use Openscad, tricks and tips to design a parametric 3D object" http://www.tridimake.com/2014/09/how-to-use-openscad-tricks-and-tips-to.html OpenSCAD discussion forum http://forum.openscad.org