Primary Mathematics/Time expressions

Primary Mathematics Time expressions Metric system Unit expressions Time math Time is often difficult to perform mathematical operations upon due to all the different units used. Units Seconds The second is the basic unit of time. In scientific areas, seconds are often used for even large time measurements, with scientific notation applied in such cases. In common usage, however, many other time intervals are also used. Seconds are abbreviated "sec" or just "s". Minutes There are 60 seconds per minute. Minutes are abbreviated "min" or just "m". Hours There are also 60 minutes per hour, which means there are 60×60 or 3600 seconds per hour. Hours are abbreviated "hr" or just "h". Days There are 24 hours per day, which means there are 60×24 or 1440 minutes per day. This, in turn, means there are 60×60×24 or 86400 seconds per day. Days are abbreviated "d". Weeks There are 7 days per week. This means there are 7×24 or 168 hours per week. Weeks are abbreviated "wk". Months There are 4 1/3 weeks per month, on average, and from 28 to 31 days per month, as follows: 28 or 29 days, depending on leap year (see the section below for leap year info): February 30 days: April, June, September, and November. 31 days: All remaining months. Months are abbreviated "mo" Memory methods Recalling which months have how many days can be tricky. There are some memory methods available to assist you, however: Knuckle method. Place your two closed fists together and use the knuckles and valleys between the knuckles to represent months: J M M J A O D A A A U U C E N R Y L G T C _ _ _ _ _ _ _ _ / \_/ \_/ \_/ \ / \_/ \_/ \_/ \ | || | | F A J || S N | | E P U || E O | | B R N || P V | | || | | / \ | | / \ | | / \ | The knuckles represent months with 31 days while the valleys represent months with 30 days (or less, in the case of February). Note that the thumbs and the gap between the hands are not used, and neither is the last valley and last knuckle. Rhyme method. "30 days hath September, April, June, and November..." Years The length of the year is based on how long it takes the Earth to revolve once around the Sun, which is approximately 365 ¼ days. Regular years have 365 days, while leap years have 366 (due to the addition of February 29th). Normal years have 52 weeks and 1 day, while leap years have 52 weeks and 2 days. All years have 12 months. Years are abbreviated "yr" or just "y". What years are leap years ? Since there is a fractional number of days in a year, not an integer, some adjustments need to be made to prevent drift from occurring (where January would eventually end up in the summer). There are occasional "leap seconds" added to some years, in addition to leap years, to keep this from happening. Here are the rules for leap years: Every fourth year is a leap year: Except every 100th year, which is not a leap year. Except every 400th year, which is a leap year. Here's a list of "every 4th year" from 1900 through 2100. All are leap years except for 1900 and 2100: 1900 (Not a leap year, due to the "every 100th year" rule). 1904 1908 1912 1916 1920 1924 1928 1932 1936 1940 1944 1948 1952 1956 1960 1964 1968 1972 1976 1980 1984 1988 1992 19962000 (Is a leap year, due to the "every 400th year" rule). 2004 2008 2012 2016 2020 2024 2028 2032 2036 2040 2044 2048 2052 2056 2060 2064 2068 2072 2076 2080 2084 2088 2092 2096 2100 (Not a leap year, due to the "every 100th year" rule). Longer periods Decade = 10 years Century = 100 years Millenium = 1000 years Myr = million years Byr = billion years Systems 12-hour clock In this traditional system, the first 12 hours in the day are called "AM" ("ante meridian", or before noon) and the last 12 are called "PM" ("post meridian", or after noon). One oddity of this system is that no zero hours are used, with 12 (from the previous time period) used in its place. 24 hour clock In this system, sometimes called military time, the first number is zero, and the full 24 hours is counted: Common name 12-hour clock 24-hour clock ================= ============= ============= "Midnight" 12:00 AM 0:00 "1 in the morning" 1:00 AM 1:00 "2 in the morning" 2:00 AM 2:00 "3 in the morning" 3:00 AM 3:00 "4 in the morning" 4:00 AM 4:00 "5 in the morning" 5:00 AM 5:00 "6 in the morning" 6:00 AM 6:00 "7 in the morning" 7:00 AM 7:00 "8 in the morning" 8:00 AM 8:00 "9 in the morning" 9:00 AM 9:00 "10 in the morning" 10:00 AM 10:00 "11 in the morning" 11:00 AM 11:00 "Noon" 12:00 PM 12:00 "1 in the afternoon" 1:00 PM 13:00 "2 in the afternoon" 2:00 PM 14:00 "3 in the afternoon" 3:00 PM 15:00 "4 in the afternoon" 4:00 PM 16:00 "5 in the afternoon" 5:00 PM 17:00 "6 in the evening" 6:00 PM 18:00 "7 in the evening" 7:00 PM 19:00 "8 in the evening" 8:00 PM 20:00 "9 in the evening" 9:00 PM 21:00 "10 in the evening" 10:00 PM 22:00 "11 in the evening" 11:00 PM 23:00 In the military, the time isn't necessarily reset at midnight. For example, a two-day operation may go up to 48:00 (said "forty-eight hundred"). This is done to make time math simpler. So, for example, the time between 20:00 and 40:00 is 20 hours. Decimal time There was an attempt at decimal time during the French Revolution, but it never caught on. Days were divided into 10 "hours", which were divided into 100 "minutes" each. "Weeks" were also 10 days long. No metric time system has ever been established. Operations Addition Addition of a time interval to a starting time (or of two time intervals) works like normal addition, except that you may want to convert to different units. Examples 31 seconds + 5 seconds = 36 seconds 43 seconds + 22 seconds = 65 seconds, which you may want to convert to 1 minute and 5 seconds 43 seconds + 11:59:22 AM = 12:00:05 PM 43 seconds + 12:00:05 PM = 12:00:48 PM Subtraction Subtraction of a time interval from an ending time (or a time interval from another) works like normal subtraction, except that you may want to convert to different units. Examples 36 seconds - 5 seconds = 31 seconds 1 minute and 36 seconds - 55 seconds = 60 seconds - 19 seconds = 41 seconds. 12:00:05 PM - 43 seconds = 11:59:22 AM Multiplication You can multiply a time interval by a scalar (unitless value), but it doesn't yet make sense to multiply specific time with anything else or two time intervals together. As before, you may want to change units to something that makes sense or perform a different operation. In Physics, you may see time intervals being multiplied. However, this is beyond the scope of elementary math and should be reserved until you are ready for the course (which requires knowledge of algebra.) Examples 43 seconds × 2 = 86 seconds = 1 minute and 26 seconds 1 day, 21 hours, 45 minutes, and 43 seconds × 2 = 2 days, 42 hours, 90 minutes, and 86 seconds = 2 days, 42 hours, 91 minutes, and 26 seconds = 2 days, 43 hours, 31 minutes, and 26 seconds = 3 days, 19 hours, 31 minutes, and 26 seconds Wrong: 10 seconds x 2 seconds = 20 seconds (Corect: 20 seconds^2) Division You can divide a time interval by a scalar (unitless value), but it doesn't make sense to divide one time by another. As before, you may want to change units. You may also see a scalar divided by a time interval. This can be used to show frequency (how often something occurs), or velocity (how fast something moves.) Repeated division by a time interval appears in physics and is used to denote acceleration. However, this concept is beyond the scope of this book. Examples 1 minute and 25 seconds / 2 = 85 seconds / 2 = 42.5 seconds 30 / 5 seconds = 6 / 1 second (indicates something happens six times every second) 50 km / 2 hours = 25 km / 1 hour (indicates something moving at 25km/h). Primary Mathematics Time expressions Metric system Unit expressions