Anodizing

Preface This Wikibook will cover the technical subject of anodizing. It will include the following: An introduction to anodizing including its history and applications The theory of anodizing A list of metals that can be anodized along with recipes for anodization. Coloring of anodized metals The equipment used in anodizing such asː tanks, power supplies, water treatment systems, etc... Introduction Anodizing is a method for growing oxide films on metals for the purposes ofː Corrosion protection Scratch resistance To provide a base for coloring or painting. The Theory of Anodizing Recipes Aluminum and Its Alloys The native oxide on aluminum is 40 to 50 Å thick. It provides some protection from corrosion but because it is thin, porous and mechanically fragile, it cannot provide a robust degree of protection. One way of improving corrosion resistance is to grow a thicker oxide film. This can be done in the following waysː Heating in air or oxygen Treating with oxidizing agents Anodic polarization Oxide films created by heating (thermal treatment) are also thin and weak. Oxide films created by treatment with oxidizing agents do not provide appreciable corrosion protection, but the can provide a good base for paint or varnish. By anodic polarization (also known as anodization) it is possible to grow oxide films up to 200 μm thick which provide good corrosion protection and can improve other properties such as scratch resistance. A typical aluminum anodizing process uses the following process parameters: Bath = 15% solution of concentrated sulfuric acid Current Density = 1.3 A/dm² Voltage = 18 to 24 Volts Temperature = 20 °C A processing time of 10 to 60 minutes will produce an oxide thickness of 2.5 to 25 μm. Alloy 1199 Coloring thumb|Aluminum can be colored with anodization. There are a few dying options available the main two groups at absorptive and electrolytic. With electrolytic you can achieve gold bronze and black in a gradient type fashion. Pending on the current density, temperature, and time the part is in the bath for dye determines the color obtained. For absorptive you must decide between azo dyes, organic dyes with a heavy metal (usually chromium), and heavy metal free organic dyes. The deciding factor is primarily light fastness and if your part or product can contain heavy metals. Equipment Links Wikipedia article on Anodizing Aluminum Anodizers Council International Hard Anodizing Association Bibliography "The Practical Anodising of Aluminum" by Walter Willy Georg Hubner and Adolf Schiltknecht. Macdonald and Evans, Ltd., 1960. "The Technology of Anodising Aluminum" by Arthur William Brace. Robert Draper Ltd., 1968. 9780852180266. "Anodizing and Coloring of Aluminum Alloys" by Satoshi Kawai. Fininshing Pubns Ltd., 2002. 978-0904477245. Paperback editionː 0-904477-24-X. "Electropolishing, Anodizing and Electrolytic Pickling of Metals" by N.P. Fedot'ev and S. Ya. Grilikhes. Translated from the Russian by A. Behr. Robert Draper, Ltd., 1959. Library of Congress Numberː TS 643 .F413. "The Surface Treatment and Finishing of Aluminum and Its Alloys" by Wernick S. Pinner and P. G. Sheasby. 2 volumes. Finishing Pubns Ltd., 2001. 978-0904477238. Library of Congress Numberː TS555 .S54x 2001. Engineering 0% A