.400 H&H Magnum

Rifle cartridge January 2013 .400 Holland & Holland Magnum United Kingdom Rifle Russell Wilkin 2003 Holland & Holland 2003–present .375 H&H Magnum Belted, bottleneck .411 .403 .441 .492 .513 .532 .050 2.846 3.550 104 Large rifle, magnum 63817 400 SP/Solid 2375 5009 24 Chuckhawks.com Chuckhawks .400 H&H page The .400 H&H Magnum also known as .400 Holland & Holland Magnum is a belted rimless bottlenecked cartridge introduced by Holland & Holland. The cartridge was released together with the .465 H&H Magnum in 2003. It is based on the .375 H&H Magnum case. General information The cartridge owes its development to hunters requesting Holland & Holland to develop a cartridge that would have increased power over the .375 H&H Magnum. The project was undertaken by Russell Wilkin, the technical director for Holland & Holland. The result was two cartridges: the .400 H&H Magnum and the .465 H&H magnum. Barnes Frank C. Skinner, Stan Cartridges of the World 11th 1965 2006 Gun Digest Books 393 0-89689-297-2 The cartridge was launched in 2003 to the public in 2003 in the UK and Europe and became available in North America in 2008. It follows in a long line of illustrious big bore cartridges introduced by Holland & Holland, the last of which was the .700 Nitro Express. The .400 H&H Magnum is a modern rifle cartridge designed for hunting large and dangerous game animals. The cartridge would be legal in countries which require a .400 minimum caliber for the hunting of dangerous game. It was engineered to provide dependable reliability in a tropical environment. The gradual tapering and moderate shoulder of the cartridge provides for reliable feeding and extraction of the cartridge. Specifications of interest to reloaders include a standard magnum rim diameter of .532". Overall case length is 2.85" (the same as the .375 case), and the cartridge overall length is 3.50". Bullet diameter is .411" and factory-loaded bullets are to be supplied by Woodleigh of Australia. These will be the same 400 grain Premium solid and Weldcore soft point bullets sold to reloaders and used in .450/400 NE factory loads. In addition, Hornady offers a 300 grain .411" Interlock bullet to reloaders. This bullet is intended for the .405 Winchester, and with moderate reloads it should be quite suitable for North American CXP3 game in the .400 H&H. And one could probably use .410" jacketed pistol bullets intended for the .41 Magnum revolver cartridge for low velocity, low recoil practice loads.Hawks Chuck First Look: The .400 H&H Magnum Belted Rimless http://www.chuckhawks.com/400_HHMag.htm Chuck Hawks 29 August 2010 Performance The .400 H&H Magnum is in the same class as the .416 Rigby and the .416 Remington Magnum with the arguably slight advantage of better sectional density given bullet of equal weight. The typical 400 gr on bullet will have a sectional density of .338 for the .400 H&H Magnum vs. .330 for the .416 caliber cartridges. The .400 H&H Magnum shares the same caliber with several .400 cartridges from the turn of the 20th century such as the .400 Jeffery Nitro Express, the 405 Winchester and the series of .450/400 cartridges. Brass stock is available from Quality Cartridge. As of 2012 Holland & Holland and Mauser produce rifles of this caliber in Europe and Dakota Arms is the sole manufacturer of this rifle in the United States. Dakota Arms custom manufactures this caliber in their Model 97 Safari series. Bullets are available from different manufacturers such as Barnes, Hornady, Woodleigh, Kynoch and North Fork. See also Table of handgun and rifle cartridges References External links Holland & Holland - corporate site Category:Pistol and rifle cartridges Category:Holland & Holland cartridges Category:British firearm cartridges