.308×1.5-inch Barnes

Wildcat cartridge based on the .308 Winchester September 2013 Product January 2023 .308×1.5" Barnes 270px USA Rifle Frank Barnes 1961 .30 BR .308 Winchester (7.62×51mm NATO) Rimless bottlenecked .308 Barnes Frank C John T. Amber Cartridges of the World 13 F+W Media 2012 1972 246 9781440230592 https://books.google.com/books?id=bjhy8uv196IC&q=308x1.5&pg=PA246 2017-09-04 .338 .450 .466 .470 .048 1.500 2.05 in mm on 38.0 12 Large rifle Approximately 60000 psi bar on 150 spitzer 2500 2082 The .308×1.5" Barnes is a wildcat cartridge based on the .308 Winchester (7.62×51mm NATO). The cartridge is similar to the 7.62×39mm Russian (M43) cartridge though it outperforms the Soviet cartridge.Barnes, p.188, "7.62x39 (M43) Russian", & p.135, ".308x1.5" (.308 Short)". It was designed by Frank C. Barnes in March 1961 by shortening the .308 Winchester to 1.5 in mm on and giving it a shoulder angle of 20° (α=40°) similar to the parent cartridge.August 2019 History The first rifles commissioned for the developmental work by Barnes for the .308×1.5" cartridge were a Swedish Model 96 Mauser with a 1 in 12 (305 mm) twist built by Les Corbet and a Remington Rolling Block with a 1 in 10 (254 mm) twist built by P.O. Ackley. Due to the weights of the bullet and the performance of the cartridge, the 1 in 12 twist became the standard by consensus. Similar cartridges Apart from experimenting with .308×1.75", the legacy of the Barnes cartridge is found in its progeny cartridges. The .308×1.5" caused a wildcatting craze,October 2015 which had individuals necking the cartridge down to .224 (5.56 mm), .243 (6 mm), .264 (6.5 mm), .284 (7 mm) and necking up to .338 (8.5 mm) and .375 (9.5 mm). Due to the cartridges' efficiency and accuracy, many of these cartridges, such as the .22 BR, 6mm BR, 6mm BR Norma, 7mm BR, and .30 BR, went on to become popular benchrest cartridges and some of these were adopted by mainstream ammunition manufacturers. The .308×1.5" was one of the original short fat cartridge designs, having a length to width ratio of 3.17. The short fat cartridge design is considered to promote efficiency and shot to shot consistency. The .308×1.5" Barnes cartridge is comparable to cartridges such as the 7.62×39mm and the .30-30 Winchester. The .308×1.5" is capable of launching a 150 gr g on bullet at 2500 ft/s m/s on. While the Barnes and 7.62×39 are similar length, the Barnes has a greater body girth, which provides a greater propellant capacity which in turn contributes to its performance advantage.October 2015 While the .30-30 Winchester has about a 16% greater capacity over the Barnes cartridge, the .30-30 has a SAAMI-recommended pressure limit of 42000 psi bar on. For this reason, most factory .30-30 ammunition loaded with a 150 gr g on bullet achieves a mere 2390 ft/s m/s on. Furthermore, the Barnes cartridge is capable of launching heavier bullets than the 7.62×39 and has the advantage of using spitzer bullets and is chambered in strong bolt-action rifles, whereas the .30-30 is commonly loaded with round-nose or flat-nose bullets due to the fact that it is chambered in lever-action rifles with tubular magazines. The .308×1.5" Barnes was intended as a short range deer cartridge that could also be used as a varmint and predator cartridge. Loaded with the 150 gr g on cartridge, it is capable of taking deer-sized game out to 150 yd m on. For predator and varmint hunting, bullets weighing 90 - 125 gr g on are commonly used. References Further reading De Haas Frank Bolt Action Rifles - 4th Edition 2003 Donnelly John J. The Handloader's Manual of Cartridge Conversions 1987 Howell Ken Designing and Forming Custom Cartridges 1995 Barnes Frank C. McPherson, M.L. Cartridges of the World 8th 1965 1997 External links Category:Pistol and rifle cartridges Category:Wildcat cartridges